FANDOM


Adjusting the position of the laminate

If the laminate is hanging over the left or right side of the card:

Open the front cover of the laminator.
Use the grey knobs to adjust the top or bottom laminate as needed. There are instructions on the inside of the door, and the default position is about 3 o'clock as shown in the picture on the right. Note that I have partially colored the knobs to better show their orientation.
Lam Knobs

Default setting for Lam Knobs

If the laminate is hanging over the top or bottom of the card:

Right-click on the printer and select "Printing Preferences."
On the "Lamination" tab adjust the horizontal position.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.