Adjusting the position of the laminate
If the laminate is hanging over the left or right side of the card:
- Open the front cover of the laminator.
- Use the grey knobs to adjust the top or bottom laminate as needed. There are instructions on the inside of the door, and the default position is about 3 o'clock as shown in the picture on the right. Note that I have partially colored the knobs to better show their orientation.
Default setting for Lam Knobs
If the laminate is hanging over the top or bottom of the card:
- Right-click on the printer and select "Printing Preferences."
- On the "Lamination" tab adjust the horizontal position.